Categories
on 13. November 2026
Have you ever wondered why the magnetic field in one room of your house wiring magnetic fields seems higher than in the next, even though there are no big power lines nearby? The answer is often inside your own walls. The wiring in a home, the pipes carrying water, and even the way circuits are laid out can create low-frequency magnetic fields that have nothing to do with the lines on your street.
Any wire that carries 60 Hz alternating current makes a magnetic field around it. In most houses, that field is very low. A large survey of 992 US homes found that the average reading in any room, away from appliances, was under 1 milligauss. But problems arise when the electricity does not return the way it should. In a properly wired circuit, the outgoing current and the returning current travel on separate wires that are close together. Their magnetic fields cancel each other out. When something breaks that balance, the field can spread across a whole room.
One common cause is current flowing on a water pipe. If a wire touches a metal pipe, or if a ground wire is attached to a pipe that also carries current from a neighbor's house, the pipe itself becomes a live conductor. That creates a magnetic field that does not cancel. Another cause is a wiring error, such as a circuit whose hot and neutral wires are not run together. A licensed electrician can track down these problems with the right tools.
If you want to check for yourself, you can buy a gaussmeter, which measures magnetic fields in milligauss. They are simple to use. You just turn it on and hold it at arm's length in the center of a room. Write down the number. Then move to another spot. The meter shows a higher reading near a lamp or a wall where wires run. That is normal. You are looking for a field that stays high even when you are far from any appliance or outlet. A reading of a few milligauss across most of a room is a sign that something in the wiring is off.
When do you call a licensed electrician? If your meter shows a field above a few milligauss in the middle of a room, and you have already unplugged everything in that room, it is a good idea to have a professional look at the circuits. The electrician can check whether the current on a water pipe is normal or whether a circuit is wired incorrectly. They can also find a loose neutral wire, which is a safety hazard as well as a source of magnetic fields.
A few things to keep in mind. The International Agency for Research on Cancer classified extremely low frequency magnetic fields as possibly carcinogenic in 2002, mainly because of studies that linked higher average exposure to childhood leukemia. Very few children live with fields that high, and those studies cannot prove cause and effect. For comparison, the international reference level for the public is 2,000 milligauss, far above anything you would measure in a house. If you have health concerns, talk to your doctor. If you have questions about the utility's lines, call your electric company. For questions about measurement standards, the Federal Communications Commission and the Institute of Electrical and Electronics Engineers publish guidance. No sticker, shield or device sold online will block a magnetic field from wiring. The only fix is to correct the wiring or the grounding path. A qualified electrician is the person for that job.
There is a fuller write-up at house wiring magnetic fields.